Deepcool EX750
- Thermal Conductivity:
- 6.2 W/mK
- Electrical Conductivity:
- Non-Conductive
- Operating Temp:
- -50 to 250 C
- Recommended Use:
- High-end CPU/GPU
Consumercarts is reader-supported. Learn more
Disclaimer: The price and specification of the given product may differ from the actual product. Please confirm on the retailer's website before buying.
Manufacturer: Deepcool Last updated: 2026-09-15
Deepcool EX750 (Non-Conductive/6.2 W/mK/Enthusiast-Grade Paste) Review
Deepcool EX750 is an enthusiast-grade thermal paste officially rated at 6.2 W/mK with an extremely low thermal impedance, designed for high performance desktop and laptop CPU and GPU cooling.
EX750 sits well above Deepcool's Z and G series in this catalog on conductivity (6.2 W/mK vs 3.5-5.2 W/mK), and Deepcool backs that up with a specific thermal impedance figure of 0.03°C·cm2/W, the same headline number CryoFuze 7 uses elsewhere in this catalog, coincidentally. The 250 C ceiling and smooth, easy-application consistency Deepcool describes make this a genuine step up for anyone repasting a high-wattage CPU or GPU rather than a budget cooler swap.
Thermal Performance and Conductivity
Officially rated at 6.2 W/(m·K) with a thermal impedance of 0.03°C·cm2/W, putting EX750 near the top of Deepcool's own catalog, just behind DS7 (6.9 W/mK).
Compound Type and Composition
Deepcool doesn't publish the specific compound chemistry, only describing it as an "industrial grade thermal interface" with a smooth consistency.
Application and Consistency
Deepcool markets a smooth consistency that fills microchannels between surfaces for easier application than thicker enthusiast-grade compounds.
Electrical Safety
Non-conductive and non-capacitive, per Deepcool's official spec sheet, described as safe and stable for PC components.
Comparison to Sibling Products
EX750 trails only DS7 (6.9 W/mK) among Deepcool compounds in this catalog and beats DS9 (6.5 W/mK) on paper conductivity, though DS9 and DS7 both include a bundled applicator that EX750's page doesn't mention.
Specifications
Quantity, volume versus weight
| Density | 2.6 g/cm3 |
|---|
| Thermal Conductivity | 6.2 W/mK |
|---|---|
| Electrical Conductivity | Insulating |
| Package Size | 3 g grease weight |
| Recommended Use | High-end CPU/GPU (marketed as "enthusiast grade" for desktop and laptop CPUs/GPUs) |
| Material | Not officially disclosed by Deepcool |
| Operating Temperature | -50°C to +250°C |
| Paste Segment | Standard Paste |
| Min Operating Temp | -50 C |
| Max Operating Temp | 250 C |
Expert Review
Reviewed by Burooj Alam. Rated by us, not by users.
Best for
- High-performance desktop or laptop CPU/GPU repastes
- Buyers who want a documented low thermal impedance figure alongside conductivity
Not for
- Budget builds where Z3 or Z5 is a cheaper adequate option
- Buyers who want a bundled scraper/cleaning wipe (not mentioned on EX750's spec sheet)
FAQs
What are the key specifications of the Deepcool EX750 (Non-Conductive/6.2 W/mK/Enthusiast-Grade Paste)?
The Deepcool EX750 (Non-Conductive/6.2 W/mK/Enthusiast-Grade Paste) is a thermal paste from Deepcool. Key specs: Form Paste, Material Not officially disclosed by Deepcool, Thermal Conductivity 6.2, Electrical Conductivity Non-Conductive (not electrically conductive or capacitant, per Deepcool), Recommended Use High-end CPU/GPU (marketed as "enthusiast grade" for desktop and laptop CPUs/GPUs).
Will the Deepcool EX750 (Non-Conductive/6.2 W/mK/Enthusiast-Grade Paste) work with my current setup?
The Deepcool EX750 (Non-Conductive/6.2 W/mK/Enthusiast-Grade Paste) lists Thermal Conductivity is 6.2. Check that against the hardware you already own before buying, since this is the field that most often decides whether a part fits.
Who is the Deepcool EX750 (Non-Conductive/6.2 W/mK/Enthusiast-Grade Paste) best suited to?
It suits high-performance desktop or laptop cpu/gpu repastes, buyers who want a documented low thermal impedance figure alongside conductivity.
What are the drawbacks of the Deepcool EX750 (Non-Conductive/6.2 W/mK/Enthusiast-Grade Paste)?
It is a poor fit for budget builds where z3 or z5 is a cheaper adequate option, buyers who want a bundled scraper/cleaning wipe (not mentioned on ex750's spec sheet).
Compare and read more
- Alphacool Apex 2 Thermal Paste (Non-Conductive/6.7 W/mK/High-end CPU/GPU) vs Deepcool EX750 (Non-Conductive/6.2 W/mK/Enthusiast-Grade Paste)
- 3M Thermally Conductive Acrylic Interface Pad 5590H (Acrylic Pad/Non-Conductive/3 W/mK) vs Deepcool EX750 (Non-Conductive/6.2 W/mK/Enthusiast-Grade Paste)
- Akasa AK-450 Silver Compound 450 (Silver-Based/5g Syringe/Spreader Card Included) vs Deepcool EX750 (Non-Conductive/6.2 W/mK/Enthusiast-Grade Paste)
- Alphacool Apex Thermal Pad Soft 18W/mK (Silicone-Based Pad/Non-Conductive/High-end CPU/GPU) vs Deepcool EX750 (Non-Conductive/6.2 W/mK/Enthusiast-Grade Paste)
- Alphacool Eisfrost Xtreme Liquid Metal Thermal Paste (Gallium Alloy/Conductive/High-end CPU/GPU) vs Deepcool EX750 (Non-Conductive/6.2 W/mK/Enthusiast-Grade Paste)