Corsair Vengeance RGB CMH32GX5M2B6000Z30W (32GB 2x16GB Kit/DDR5 6000MHz/CL30 30-36-36-76/1.40V/RGB Anodized Aluminium White/Intel XMP 3.0 + AMD EXPO)
Consumercarts is reader-supported. When you buy through links on our site, we may earn a commission. As an Amazon Associate, we earn from qualifying purchases.
- Model:
- Corsair Vengeance RGB|CMH32GX5M2B6000Z30W|B Revision
- Capacity:
- 32GB|2x16GB Kit|16GB per Module
- Memory Type:
- DDR5|288-Pin DIMM|Non-ECC|Unbuffered
- Speed:
- 6000MHz|PC5-48000
- Timings:
- CL30|30-36-36-76
- Voltage:
- 1.40V
- Overclocking:
- Intel XMP 3.0|AMD EXPO
- Heat Spreader:
- Anodized Aluminum|~44mm Height|RGB Light Bar|iCUE Controlled
- Color Options:
- White|Black|Gray
- Form Factor:
- Desktop DIMM
- Compatibility:
- Intel and AMD DDR5 Platforms|XMP 3.0 and EXPO Support
- Warranty:
- Limited Lifetime
Disclaimer: The price and specification of the given product may differ from the actual product. Please confirm on the retailer's website before buying.
Manufacturer: Corsair Last updated: September 7, 2026
The Corsair Vengeance RGB CMH32GX5M2B6000Z30W is the white version of Corsair's 32GB (2x16GB) DDR5-6000 CL30 RGB kit, sharing identical 30-36-36-76 secondary timings and 1.40V operating voltage with its grey and black siblings under the same B revision code. It supports Intel XMP 3.0 and AMD EXPO natively and carries a panoramic RGB light bar on each module, controlled through Corsair iCUE.
The only difference between this SKU and the grey CMH32GX5M2B6000Z30K covered elsewhere on this site is the heat spreader colour. Performance, timings, voltage, height and every electrical spec are identical. This white finish exists specifically for white or light-themed builds, where a grey or black kit would visibly clash.
Performance and Timings
CL30 at 6000MHz gives 10ns of true latency, the same figure as every other kit in this B-revision 6000MHz CL30 family regardless of colour. This is widely regarded as the current sweet spot for DDR5 pricing versus performance, and it lines up with AMD's own recommendation for running Ryzen 7000 and 9000 series infinity fabric at its most efficient 1:1 ratio with memory. Because colour has no bearing on the underlying silicon or timings, everything said about performance for the grey and black versions of this exact kit applies here without change.
Compatibility
DDR5 only. Enable XMP 3.0 on Intel or EXPO on AMD in BIOS to reach the rated 6000MHz; both profiles live natively on the module. 6000MHz CL30 is the frequency most commonly recommended for AM5 builds specifically, and it's within normal XMP tolerance on any reasonably current Intel board. At roughly 44mm tall, the same clearance consideration applies as with the other colourways in this line: check the cooler before buying if a large air tower is involved.
Module Count and Rank
Two modules, 16GB each, identical configuration to the rest of the family. Buy the full capacity needed in a single matched kit rather than planning to add a second kit later; mixing kits, even the same part number bought separately, remains a more common source of instability on DDR5 than it was on DDR4.
Design and Build
White heat spreader with a panoramic RGB light bar per module, addressable and controlled through iCUE, with the option to sync lighting across other Corsair RGB components. This is the finish to pick for a white or light-toned build where a grey or black kit would be the visibly wrong choice; performance is identical to the grey version covered elsewhere on this site.
Overclocking and BIOS Setup
Boots at DDR5's JEDEC baseline until XMP or EXPO is enabled in BIOS. Select the correct profile for your platform, choose the 6000MHz CL30 setting, save, reboot, and confirm the applied speed in CPU-Z. Manual tuning beyond the stock profile is possible through iCUE but not something Corsair documents per unit; this kit ships already binned and priced as a performance-tier product.
Comparison to Sibling Products
Identical in every respect except colour to the grey CMH32GX5M2B6000Z30K and the black variant in the same family. The only real decision is heat spreader colour matched to the build. Against Corsair's own non-RGB Vengeance kit at the same speed and CAS grade, this RGB version costs more for a taller heat spreader and lighting; against the cheaper RGB RS line, it offers tighter CL30 timings at a higher price.
Who This Kit Is Actually For
White or light-themed builds on AM5 or recent Intel platforms. Same CL30 performance as the rest of the family, correct colour for the build. Buyers already committed to a white Corsair ecosystem. Coolers, fans and cases in white pair directly with this kit without a mismatched grey or black component in the window. Not for anyone where colour doesn't matter. The grey version of this exact kit is typically the more available, sometimes cheaper option with zero performance difference. Not for large air-cooled builds without checking clearance. Same roughly 44mm height as the rest of the RGB line.
Expert Review
Rated by the Consumercarts editorial team, not by users
Best for
- White or light-themed builds on AM5 or recent Intel platforms
- Buyers already committed to a white Corsair ecosystem
Not for
- anyone where colour doesn't matter
- large air-cooled builds without checking clearance