Corsair Vengeance RGB CMH32GX5M2E6000C36W (32GB 2x16GB Kit/DDR5 6000MHz/CL36 36-44-44-96/1.35V/RGB Anodized Aluminium White/Intel XMP 3.0 + AMD EXPO)
Consumercarts is reader-supported. When you buy through links on our site, we may earn a commission. As an Amazon Associate, we earn from qualifying purchases.
- Model:
- Corsair Vengeance RGB|CMH32GX5M2E6000C36W|E Revision
- Capacity:
- 32GB|2x16GB Kit|16GB per Module
- Memory Type:
- DDR5|288-Pin DIMM|Non-ECC|Unbuffered
- Speed:
- 6000MHz|PC5-48000
- Timings:
- CL36|36-44-44-96
- Voltage:
- 1.35V
- Overclocking:
- Intel XMP 3.0|AMD EXPO
- Heat Spreader:
- Anodized Aluminum|~45mm Height|RGB Light Bar|iCUE Controlled
- Color Options:
- White|Black
- Form Factor:
- Desktop DIMM
- Compatibility:
- Intel and AMD DDR5 Platforms|XMP 3.0 and EXPO Support
- Warranty:
- Limited Lifetime
Disclaimer: The price and specification of the given product may differ from the actual product. Please confirm on the retailer's website before buying.
Manufacturer: Corsair Last updated: September 7, 2026
The Corsair Vengeance RGB CMH32GX5M2E6000C36W is a 32GB (2x16GB) DDR5 memory kit running at 6000MHz (PC5-48000) with CL36 primary timings, 36-44-44-96 secondary timings, and 1.35V operating voltage. It sits in the E-revision family, one full step down in latency from the B-revision CL30 kits covered elsewhere on this site, and carries the same RGB light bar and iCUE control as the rest of Corsair's Vengeance RGB DDR5 line.
The E-revision CL36 profile is Corsair's mainstream 6000MHz option, priced below the CL30 kits while still hitting the frequency AMD recommends for Ryzen's infinity fabric sweet spot. This is the practical, not-quite-flagship choice at 6000MHz.
Performance and Timings
CL36 at 6000MHz works out to 12ns of true latency, versus 10ns on the CL30 kits at the same frequency. In real terms that's a small, mostly benchmark-visible gap: a few percent in memory-latency-sensitive synthetic tests, and closer to negligible in GPU-bound gaming or general desktop use. The E revision code specifically ties to the 36-44-44-96 secondary timing profile, confirmed consistently across Corsair's black and white colourways at this exact speed and CL grade, which is the same pattern seen across Corsair's other DDR5 revision families: the revision letter, not the colour, determines the underlying timings.
Compatibility
DDR5 only, fits DDR5 boards exclusively. Enable XMP 3.0 on Intel or EXPO on AMD to reach 6000MHz; both are native profiles on the module. 6000MHz remains the AMD-recommended frequency for Ryzen 7000 and 9000 series regardless of which CL grade is chosen, so this kit hits the same fabric-ratio sweet spot as the CL30 version, just with slightly looser timings. At roughly 45mm tall, check clearance under large air coolers before buying, the same consideration that applies across Corsair's RGB DDR5 line.
Module Count and Rank
Two 16GB modules. Buy the full capacity needed in one matched kit; mixing separately purchased kits, even under the same part number, remains a common cause of DDR5 boot and stability issues.
Design and Build
Standard Vengeance RGB heat spreader design, anodized aluminium with a per-module light bar controlled through iCUE, in this white finish alongside a black option in the same E-revision CL36 family. Height sits around 45mm, in line with the rest of Corsair's RGB DDR5 kits.
Overclocking and BIOS Setup
Boots at JEDEC baseline until XMP or EXPO is enabled in BIOS. Select the correct profile, choose the listed 6000MHz CL36 setting, save, reboot, and verify in CPU-Z. This kit is sold and priced as a mainstream performance kit rather than a tuning platform; running the stock profile is the intended use case for nearly all buyers.
Comparison to Sibling Products
Directly below this kit in Corsair's own lineup sits the CL30 version at the same 6000MHz and capacity, offering tighter timings for a real price premium. Directly below this kit sits the RGB RS line at the same 6000MHz CL36 speed grade, offering the same lighting concept at a lower price with fewer colour options. Corsair's own positioning places RGB RS as the accessible tier and this Vengeance RGB line as the step above it in both speed options and finish choice.
Who This Kit Is Actually For
Buyers who want 6000MHz DDR5 without paying CL30 pricing. Same frequency, same AMD fabric-ratio benefit, meaningfully cheaper. White-build enthusiasts who don't need the absolute tightest timings. Full RGB, correct colourway, sensible price. Not for buyers chasing the lowest possible latency. The CL30 kit in the same line is the one to buy for that. Not for large air-cooled builds without checking clearance. Same roughly 45mm height as the rest of the RGB range.
Expert Review
Rated by the Consumercarts editorial team, not by users
Best for
- Buyers who want 6000MHz DDR5 without paying CL30 pricing
- White-build enthusiasts who don't need the absolute tightest timings
Not for
- buyers chasing the lowest possible latency
- large air-cooled builds without checking clearance