G.Skill Ripjaws S5 F5-6000J3636F32GX2-RS5K
Expert rating8 / 10
- Model:
- G.Skill Ripjaws S5
- Capacity:
- 64GB (2x32GB Kit)
- DDR Generation:
- DDR5
- Speed:
- 6000MT/s
- CAS Latency:
- CL36
- Voltage:
- 1.35V
- Overclocking:
- Intel XMP 3.0 + AMD EXPO
- Heat Spreader:
- No RGB
- Warranty:
- Limited Lifetime
Consumercarts is reader-supported. Learn more
Disclaimer: The price and specification of the given product may differ from the actual product. Please confirm on the retailer's website before buying.
Manufacturer: G.Skill Last updated: September 12, 2026
Where to buy
- AmazonGo to store
- NeweggGo to store
G.Skill Ripjaws S5 F5-6000J3636F32GX2-RS5K Review
The G.Skill Ripjaws S5 F5-6000J3636F32GX2-RS5K packs 64GB into low-profile modules rated for DDR5-6000 CL36, certified on both Intel XMP 3.0 and AMD EXPO for builds that need large air cooler clearance.
64GB builds needing low-profile clearance for large air coolers. Not for RGB-focused builds. Skip if 32GB already covers your workload.
Performance and Timings
At DDR5-6000 CL36 (36-36-36-96), this kit lands at roughly 12.0ns of true first-word latency, a figure worth checking against any kit you're cross-shopping rather than judging by CAS number alone.
Compatibility
Rated timings load via Intel XMP 3.0 + AMD EXPO with a single BIOS toggle; outside that profile the kit boots at JEDEC defaults on any DDR5 platform. Confirm your motherboard's QVL and populate matched slots for dual/quad-channel operation.
Module Count and Rank
Ships as 2 x 32GB modules for a 64GB total; buy the full kit as one matched set rather than pairing separately purchased sticks, since G.Skill does not guarantee cross-kit compatibility.
Design and Build
Matte Black aluminum heat spreader, finished without RGB for a lower profile and simpler build.
Overclocking and BIOS Setup
Select either the Intel XMP 3.0 or AMD EXPO profile to load the CL36 6000MT/s timing.
Comparison to Alternatives
Against the G.Skill Ripjaws S5 F5-6000J3636F16GX2-RS5K already in this catalog and the G.Skill Flare X5 F5-6000J3636F32GX2-FX5 already in this catalog, this Ripjaws S5 kit is worth weighing on price-per-GB, rated timings, and whether the extra RGB or premium finish actually matters for your build before paying a premium for either.
Our verdict
Reviewed by Burooj Alam. Rated by us, not by users.
Expert rating8 / 10
A 64GB low-profile DDR5-6000 kit that clears even the tallest air coolers, dual-certified for both major platforms.
Best for
- 64GB low-profile builds needing large air coolers with limited DIMM clearance.
- Dual-platform builds wanting a single kit certified for both Intel and AMD.
- Workstation builds that don't need RGB lighting.
Not for
- RGB-focused builds; Ripjaws S5 ships without lighting.
- SFF cases so tight that even a low-profile kit doesn't fit; check clearance first.
- Budget 32GB builds where this 64GB kit is more capacity than needed.
Specifications
What these specs meanHow fast this kit is among DDR5 kits, rated from its speed and latency.
Identity
| Peak Bandwidth | 96.0 GB/s |
|---|---|
| Brand | G.Skill |
| Part Number | F5-6000J3636F32GX2-RS5K |
| Series | Ripjaws S5 |
Memory
| DDR Generation | DDR5 |
|---|---|
| Capacity | 64 GB |
| Speed | 6000 MT/s |
| CAS Latency | 36 |
| Module Count | 2 |
| Voltage | 1.35 V |
Physical
| RGB Lighting | No |
|---|
Module and platform
| RAM Segment | Desktop DDR5 |
|---|---|
| Form Factor | 288-Pin DIMM |
| Platform Optimisation | Both |
Capacity
| Capacity Per Module | 32 GB |
|---|
Speed and timings
| True Latency | 12.0 ns |
|---|
Overclocking profile
| XMP Support | Yes |
|---|---|
| XMP Version | XMP 3.0 |
| EXPO Support | Yes |
Silicon
| ECC | No |
|---|
Physical and lighting
| Colour | Matte Black |
|---|
Commercial
| Warranty | Limited Lifetime |
|---|
FAQs
What are the key specifications of the G.Skill Ripjaws S5 F5-6000J3636F32GX2-RS5K (64GB 2x32GB Kit/DDR5 6000MHz/CL36 36-36-36-96/1.35V/No RGB Matte Black/Intel XMP 3.0 + AMD EXPO)?
Key specs for the G.Skill Ripjaws S5 F5-6000J3636F32GX2-RS5K: Capacity Per Module 32 GB, Capacity 64 GB, Speed 6000 MT/s, OC Profile XMP 3.0 + EXPO, Voltage 1.35 V, DDR Generation DDR5.
Will the G.Skill Ripjaws S5 F5-6000J3636F32GX2-RS5K (64GB 2x32GB Kit/DDR5 6000MHz/CL36 36-36-36-96/1.35V/No RGB Matte Black/Intel XMP 3.0 + AMD EXPO) work with my current setup?
The G.Skill Ripjaws S5 F5-6000J3636F32GX2-RS5K (64GB 2x32GB Kit/DDR5 6000MHz/CL36 36-36-36-96/1.35V/No RGB Matte Black/Intel XMP 3.0 + AMD EXPO) lists DDR Generation is DDR5. Check that against the hardware you already own before buying, since this is the field that most often decides whether a part fits. Our upgrade checker at /upgrade can confirm compatibility for common combinations.
Who is the G.Skill Ripjaws S5 F5-6000J3636F32GX2-RS5K (64GB 2x32GB Kit/DDR5 6000MHz/CL36 36-36-36-96/1.35V/No RGB Matte Black/Intel XMP 3.0 + AMD EXPO) best suited to?
Best suited to: 64GB low-profile builds needing large air coolers with limited DIMM clearance; Dual-platform builds wanting a single kit certified for both Intel and AMD; Workstation builds that don't need RGB lighting.
What are the drawbacks of the G.Skill Ripjaws S5 F5-6000J3636F32GX2-RS5K (64GB 2x32GB Kit/DDR5 6000MHz/CL36 36-36-36-96/1.35V/No RGB Matte Black/Intel XMP 3.0 + AMD EXPO)?
Not the best fit for: RGB-focused builds; Ripjaws S5 ships without lighting; SFF cases so tight that even a low-profile kit doesn't fit; check clearance first; Budget 32GB builds where this 64GB kit is more capacity than needed.