G.Skill Ripjaws V F4-3600C16D-32GVK
- Model:
- G.Skill Ripjaws V
- Capacity:
- 32GB (2x16GB Kit)
- DDR Generation:
- DDR4
- Speed:
- 3600MHz (PC4-28800)
- CAS Latency:
- CL16
- Voltage:
- 1.35V
- Overclocking:
- Intel XMP 2.0
- Heat Spreader:
- No RGB
- Warranty:
- Limited Lifetime
Consumercarts is reader-supported. Learn more
Disclaimer: The price and specification of the given product may differ from the actual product. Please confirm on the retailer's website before buying.
Manufacturer: G.Skill Last updated: September 8, 2026
G.Skill Ripjaws V F4-3600C16D-32GVK (32GB 2x16GB Kit/DDR4 3600MHz/CL16/No RGB/1.35V/Intel XMP 2.0) Review
The G.Skill Ripjaws V F4-3600C16D-32GVK is a long-running, widely trusted 32GB DDR4 kit at 3600MHz CL16, a genuinely tight timing for this frequency that made this exact kit a common recommendation across the DDR4 generation for both Intel and Ryzen builds.
DDR4 builds wanting a proven, tightly-timed 32GB kit without RGB. A long-established, widely trusted timing tier. Not for new 2026 builds. DDR4 is end of life; DDR5 is the right platform for a new build.
Performance and Timings
CL16 at 3600MHz gives roughly 8.9ns true latency, a genuinely strong timing for DDR4, tighter than the more common 3200MHz CL16 tier most DDR4 kits shipped at.
Compatibility
Intel XMP 2.0 reaches the rated 3600MHz with a single BIOS toggle; on AMD boards, the same profile is typically read through DOCP or AMP. DDR4 only, not compatible with DDR5-only motherboards.
Module Count and Rank
Two 16GB modules. Buy the full 32GB in one matched kit rather than combining separately purchased kits later.
Design and Build
A low-profile, no-RGB aluminum heat spreader, keeping this kit compatible with large air coolers and small form factor cases.
Overclocking and BIOS Setup
Boots at JEDEC baseline until XMP is enabled. Select the profile, choose 3600MHz CL16, save, reboot, verify in CPU-Z.
Comparison to Sibling Products
Against G.Skill’s own Trident Z Neo at the same 3600MHz CL16 speed, that kit adds RGB lighting and a taller heat spreader for a real price premium.
Specifications
Identity
| Brand | G.Skill |
|---|---|
| Series | Ripjaws V |
Memory
| DDR Generation | DDR4, 288-Pin DIMM, Non-ECC, Unbuffered |
|---|---|
| Capacity | 32 GB |
| Speed | 3600 MT/s |
| CAS Latency | 16 |
| Voltage | 1.35 V |
Commercial
| Warranty | Limited Lifetime |
|---|
| Model Number | F4-3600C16D-32GVK |
|---|---|
| OC Profile | Intel XMP 2.0 |
| Heat Spreader | No RGB, Low-Profile Aluminum |
Expert Review
Reviewed by Burooj Alam. Rated by us, not by users.
Best for
- DDR4 builds wanting a proven, tightly-timed 32GB kit without RGB. A long-established, widely trusted timing tier.
Not for
- Not for new 2026 builds. DDR4 is end of life; DDR5 is the right platform for a new build.
FAQs
What are the key specifications of the G.Skill Ripjaws V F4-3600C16D-32GVK (32GB 2x16GB Kit/DDR4 3600MHz/CL16/No RGB/1.35V/Intel XMP 2.0)?
The G.Skill Ripjaws V F4-3600C16D-32GVK (32GB 2x16GB Kit/DDR4 3600MHz/CL16/No RGB/1.35V/Intel XMP 2.0) is a memory kit from G.Skill. Key specs: Capacity 32GB (2x16GB Kit), DDR Generation DDR4, 288-Pin DIMM, Non-ECC, Unbuffered, Speed 3600MHz (PC4-28800), CAS Latency 16, Voltage 1.35V.
Will the G.Skill Ripjaws V F4-3600C16D-32GVK (32GB 2x16GB Kit/DDR4 3600MHz/CL16/No RGB/1.35V/Intel XMP 2.0) work with my current setup?
The G.Skill Ripjaws V F4-3600C16D-32GVK (32GB 2x16GB Kit/DDR4 3600MHz/CL16/No RGB/1.35V/Intel XMP 2.0) lists DDR Generation is DDR4, 288-Pin DIMM, Non-ECC, Unbuffered. Check that against the hardware you already own before buying, since this is the field that most often decides whether a part fits. Our upgrade checker at /upgrade can confirm compatibility for common combinations.
Who is the G.Skill Ripjaws V F4-3600C16D-32GVK (32GB 2x16GB Kit/DDR4 3600MHz/CL16/No RGB/1.35V/Intel XMP 2.0) best suited to?
It suits ddr4 builds wanting a proven, tightly-timed 32gb kit without rgb. a long-established, widely trusted timing tier..
What are the drawbacks of the G.Skill Ripjaws V F4-3600C16D-32GVK (32GB 2x16GB Kit/DDR4 3600MHz/CL16/No RGB/1.35V/Intel XMP 2.0)?
It is a poor fit for not for new 2026 builds. ddr4 is end of life; ddr5 is the right platform for a new build..
Compare and read more
- ADATA Industrial AD4U3200716G22-BADZ (16GB DDR4-3200 ECC UDIMM/2Rx8/1.2V/288-Pin/Industrial-Grade) vs G.Skill Ripjaws V F4-3600C16D-32GVK (32GB 2x16GB Kit/DDR4 3600MHz/CL16/No RGB/1.35V/Intel XMP 2.0)
- Corsair Vengeance LPX CMK32GX4M2E3200C16 (32GB 2x16GB Kit/DDR4 3200MHz/CL16 16-20-20-38/1.35V/Low Profile Aluminium/Intel XMP 2.0) vs G.Skill Ripjaws V F4-3600C16D-32GVK (32GB 2x16GB Kit/DDR4 3600MHz/CL16/No RGB/1.35V/Intel XMP 2.0)
- ADATA AO2V48UC8W1-BHLS 8GB vs G.Skill Ripjaws V F4-3600C16D-32GVK (32GB 2x16GB Kit/DDR4 3600MHz/CL16/No RGB/1.35V/Intel XMP 2.0)
- ADATA AX5U5200C3816G-B 16GB DDR5-5200 CL38 Bare/Tray Module vs G.Skill Ripjaws V F4-3600C16D-32GVK (32GB 2x16GB Kit/DDR4 3600MHz/CL16/No RGB/1.35V/Intel XMP 2.0)