Kingston FURY Beast RGB KF560C30BBEAK2-32
- Model:
- Kingston FURY Beast RGB
- Capacity:
- 32GB (2x16GB Kit)
- DDR Generation:
- DDR5
- Speed:
- 6000MT/s (PC5-48000)
- CAS Latency:
- CL30
- Overclocking:
- Intel XMP 3.0 Certified
- RGB Lighting:
- Dynamic RGB
- Warranty:
- Limited Lifetime
Consumercarts is reader-supported. Learn more
Disclaimer: The price and specification of the given product may differ from the actual product. Please confirm on the retailer's website before buying.
Manufacturer: Kingston Last updated: September 8, 2026
Kingston FURY Beast RGB KF560C30BBEAK2-32 (32GB 2x16GB Kit/DDR5 6000MHz/CL30/RGB/Intel XMP 3.0) Review
The Kingston FURY Beast RGB KF560C30BBEAK2-32 is a 32GB (2x16GB) DDR5 kit at the tight CL30 timing and mainstream 6000MHz frequency, part of Kingston’s most popular gaming memory line. It’s 100% factory tested at the advertised speed and uses Kingston’s Infrared Sync technology for wireless-style RGB synchronization between modules.
Mainstream gaming builds wanting genuinely tight 6000MHz timing with RGB. Factory-tested, cable-free RGB sync, and a proven mainstream performance tier. Not for buyers chasing frequencies above 6000MHz. Kingston’s FURY Renegade line, covered elsewhere on this site, is the right tier for that.
Performance and Timings
CL30 at 6000MHz gives 10ns true latency, a genuinely tight timing for this mainstream frequency tier, and on-die ECC (ODECC) provides improved stability at these speeds regardless of whether the board’s chipset otherwise supports ECC.
Compatibility
Intel XMP 3.0 certification reaches the rated 6000MHz CL30 with a single BIOS toggle, and Kingston states this kit is 100% factory tested at the advertised speed before shipping, a genuine quality-control signal.
Module Count and Rank
Two 16GB modules. Buy the full 32GB in one matched kit rather than combining separately purchased kits later.
Design and Build
Dynamic RGB lighting uses Kingston’s Infrared Sync technology, which synchronizes lighting effects across modules without a physical connector cable between them, controlled through the FURY CTRL software offering 18 customizable effects.
Overclocking and BIOS Setup
Boots at JEDEC baseline until XMP is enabled. Select the profile, choose 6000MHz CL30, save, reboot, verify in CPU-Z.
Comparison to Sibling Products
Against Kingston’s own FURY Renegade DDR5 line, that series pushes to higher frequencies (up to 8800MT/s on CUDIMM variants) with a more premium heat spreader design, at a real price premium over this mainstream FURY Beast tier. Against G.Skill’s Trident Z5 RGB at the same CL30 6000MHz speed, both compete directly at this performance tier.
Specifications
Identity
| Brand | Kingston |
|---|---|
| Series | FURY Beast RGB |
Memory
| DDR Generation | DDR5, 288-Pin DIMM, Non-ECC, Unbuffered, On-Die ECC (ODECC) |
|---|---|
| Capacity | 32 GB |
| Speed | 6000MT/s (PC5-48000) |
| CAS Latency | 30 |
| Module Count | 2 |
Module and platform
| RAM Segment | Desktop DDR5 |
|---|
Capacity
| Capacity Per Module | 16 GB |
|---|
Speed and timings
| True Latency | 10.0 ns |
|---|
Commercial
| Warranty | Limited Lifetime |
|---|
| Model Number | KF560C30BBEAK2-32 |
|---|---|
| OC Profile | Intel XMP 3.0 Certified |
| Platform Sweet Spot | AM5 |
| Spec Score | 6.5 |
Expert Review
Reviewed by Burooj Alam. Rated by us, not by users.
Best for
- Mainstream gaming builds wanting genuinely tight 6000MHz timing with RGB. Factory-tested, cable-free RGB sync, and a proven mainstream performance tier.
Not for
- Not for buyers chasing frequencies above 6000MHz. Kingston’s FURY Renegade line, covered elsewhere on this site, is the right tier for that.
FAQs
What are the key specifications of the Kingston FURY Beast RGB KF560C30BBEAK2-32 (32GB 2x16GB Kit/DDR5 6000MHz/CL30/RGB/Intel XMP 3.0)?
The Kingston FURY Beast RGB KF560C30BBEAK2-32 (32GB 2x16GB Kit/DDR5 6000MHz/CL30/RGB/Intel XMP 3.0) is a memory kit from Kingston. Key specs: Capacity 32GB (2x16GB Kit), DDR Generation DDR5, 288-Pin DIMM, Non-ECC, Unbuffered, On-Die ECC (ODECC), Speed 6000MT/s (PC5-48000), CAS Latency 30, Overclocking Intel XMP 3.0 Certified.
Will the Kingston FURY Beast RGB KF560C30BBEAK2-32 (32GB 2x16GB Kit/DDR5 6000MHz/CL30/RGB/Intel XMP 3.0) work with my current setup?
The Kingston FURY Beast RGB KF560C30BBEAK2-32 (32GB 2x16GB Kit/DDR5 6000MHz/CL30/RGB/Intel XMP 3.0) lists DDR Generation is DDR5, 288-Pin DIMM, Non-ECC, Unbuffered, On-Die ECC (ODECC). Check that against the hardware you already own before buying, since this is the field that most often decides whether a part fits. Our upgrade checker at /upgrade can confirm compatibility for common combinations.
Who is the Kingston FURY Beast RGB KF560C30BBEAK2-32 (32GB 2x16GB Kit/DDR5 6000MHz/CL30/RGB/Intel XMP 3.0) best suited to?
It suits mainstream gaming builds wanting genuinely tight 6000mhz timing with rgb. factory-tested, cable-free rgb sync, and a proven mainstream performance tier..
What are the drawbacks of the Kingston FURY Beast RGB KF560C30BBEAK2-32 (32GB 2x16GB Kit/DDR5 6000MHz/CL30/RGB/Intel XMP 3.0)?
It is a poor fit for not for buyers chasing frequencies above 6000mhz. kingston’s fury renegade line, covered elsewhere on this site, is the right tier for that..
Compare and read more
- ADATA Industrial AD4U3200716G22-BADZ (16GB DDR4-3200 ECC UDIMM/2Rx8/1.2V/288-Pin/Industrial-Grade) vs Kingston FURY Beast RGB KF560C30BBEAK2-32 (32GB 2x16GB Kit/DDR5 6000MHz/CL30/RGB/Intel XMP 3.0)
- ADATA AO2V48UC8W1-BHLS 8GB vs Kingston FURY Beast RGB KF560C30BBEAK2-32 (32GB 2x16GB Kit/DDR5 6000MHz/CL30/RGB/Intel XMP 3.0)
- ADATA AX5U5200C3816G-B 16GB DDR5-5200 CL38 Bare/Tray Module vs Kingston FURY Beast RGB KF560C30BBEAK2-32 (32GB 2x16GB Kit/DDR5 6000MHz/CL30/RGB/Intel XMP 3.0)