Consumercarts
Lian Li LANCOOL 217 ATX mid-tower PC case in black
Lian Li

Lian Li Lancool 217

Expert rating8.5 / 10

Case Type:
Mid-Tower
Motherboard Support:
E-ATX
GPU Clearance:
384mm
Radiator Support:
360mm front

Consumercarts is reader-supported. Learn more

Disclaimer: The price and specification of the given product may differ from the actual product. Please confirm on the retailer's website before buying.

Manufacturer: Lian Li Last updated: 2026-09-12

Where to buy

Lian Li Lancool 217 (Mid-Tower ATX/Mesh Front & Top/3x 140mm ARGB Fans Included/High-Airflow Value Pick) Review

If you're weighing the Lian Li Lancool 217 against other mesh mid-towers to find the best airflow case around $100, here's the rundown.

We'd put the Lancool 217 near the top of the budget-airflow pile. Mesh wraps the front and top, three 140mm ARGB fans come pre-installed instead of the usual two cheap 120s, and 384mm of GPU clearance swallows any RTX 4080 or 4090 without drama.

Airflow & Build

Two 140mm intake fans up front and one 140mm exhaust out back all run off a single PWM hub, so there's no fan controller shopping required. Cable channels are deep enough for a stock 24-pin and thick GPU cables without fighting the side panel shut.

Comparison to Alternatives

The Lancool 217 is Lian Li's airflow-first answer to its own showcase-focused O11 Dynamic line, and it also undercuts the Corsair 4000D Airflow on fan count while matching its price. If dual-chamber cable hiding matters more than raw thermals, the Lian Li O11 Dynamic EVO in our catalog is the better pick.

Specifications

Identity

BrandLian Li
ModelLancool 217
Typical Price110 USD

Design

Motherboard SupportE-ATX (up to 280mm wide), ATX, mATX, ITX
Case TypeMid-Tower
Panel TypeFull mesh front and top, tempered glass side

Clearance & Cooling

GPU Clearance384 mm
CPU Cooler Clearance181 mm
Included Fans3
Radiator SupportFront up to 360mm, top up to 280mm
Front USB-CYes
Dimensions453 x 230 x 460mm

Expert Review

Reviewed by Burooj Alam. Rated by us, not by users.

Expert rating8.5 / 10

One of the best value airflow cases on the market right now: three fans included, mesh everywhere it counts, and no compromises for the price.

Best for

  • Budget-conscious airflow builds
  • Air-cooled high-wattage GPUs
  • Builders who don't want to buy extra fans

Not for

  • Showcase/RGB dual-chamber builds
  • Silent or dampened builds
  • SFF desks with limited depth

FAQs

What are the key specifications of the Lian Li Lancool 217 (Mid-Tower ATX/Mesh Front & Top/3x 140mm ARGB Fans Included/High-Airflow Value Pick)?

The Lian Li Lancool 217 (Mid-Tower ATX/Mesh Front & Top/3x 140mm ARGB Fans Included/High-Airflow Value Pick) is a PC case from Lian Li. Key specs: Case Type Mid-Tower, Motherboard Support E-ATX (up to 280mm wide), ATX, mATX, ITX, Panel Type Full mesh front and top, tempered glass side, GPU Clearance 384, CPU Cooler Clearance 181.

Will the Lian Li Lancool 217 (Mid-Tower ATX/Mesh Front & Top/3x 140mm ARGB Fans Included/High-Airflow Value Pick) work with my current setup?

The Lian Li Lancool 217 (Mid-Tower ATX/Mesh Front & Top/3x 140mm ARGB Fans Included/High-Airflow Value Pick) lists Motherboard Support is E-ATX (up to 280mm wide), ATX, mATX, ITX. Check that against the hardware you already own before buying, since this is the field that most often decides whether a part fits.

Who is the Lian Li Lancool 217 (Mid-Tower ATX/Mesh Front & Top/3x 140mm ARGB Fans Included/High-Airflow Value Pick) best suited to?

It suits budget-conscious airflow builds, air-cooled high-wattage gpus, builders who don't want to buy extra fans.

What are the drawbacks of the Lian Li Lancool 217 (Mid-Tower ATX/Mesh Front & Top/3x 140mm ARGB Fans Included/High-Airflow Value Pick)?

It is a poor fit for showcase/rgb dual-chamber builds, silent or dampened builds, sff desks with limited depth.

Compare and read more