Phobya

Phobya Thermal Pad Ultra 5W/mK

Expert rating5.8 / 10

View on Performance-PCsView on aquatuning.com

Thermal Conductivity:: 5 W/mK
Electrical Conductivity:: Non-Conductive
Recommended Use:: Mainstream CPU/GPU
Package Size:: 15x15x4mm

Consumercarts is reader-supported. Learn more

Disclaimer: The price and specification of the given product may differ from the actual product. Please confirm on the retailer's website before buying.

Manufacturer: Phobya Last updated: 2026-09-15

Where to buy

Performance-PCsGo to store
NeweggGo to store

Phobya Thermal Pad Ultra 5W/mK Review

The Phobya Thermal Pad Ultra is Phobya's mid-conductivity thermal pad line, rated 5 W/mK and sold in many sizes for VRAM, VRM, and other board-level components that need a flexible cut-to-size pad rather than a paste.

Phobya officially rates the Thermal Pad Ultra line at 5 W/mK, and the pad is designed to be very soft and flexible so it adapts to height differences and surface irregularities at low contact pressure, unlike a stiffer standard pad. This 15x15x4mm piece can bridge gaps up to 4mm and compresses to roughly half its original thickness under mounting pressure, and the surface ships with a protective foil over a slightly sticky adhesive that keeps the pad from sliding once installed. It's electrically non-conductive, so it's safe for direct contact with VRAM and VRM circuitry. Against Phobya's own Thermal Pad XT also in this catalog, the Ultra line runs lower conductivity (5 vs 7 W/mK) but offers a thicker, more compressible option for bridging larger height differences.

Thermal Performance and Conductivity

Phobya officially rates the Thermal Pad Ultra line at 5 W/mK, below the company's newer Thermal Pad XT line (7 W/mK) also sold under the Phobya brand.

Composition

Phobya markets the Thermal Pad Ultra as a flexible, low-hardness pad material designed to equalize height differences on coolers and cooled surfaces.

Application and Consistency

This 15x15x4mm piece bridges gaps up to 4mm and compresses to about half its original thickness under mounting pressure; a protective foil covers the slightly sticky surface until installation.

Electrical Safety

The pad is electrically non-conductive, making it safe for direct contact with VRAM, VRM, and other exposed board circuitry.

Longevity and Pump-Out Resistance

As a solid pad rather than a spreadable paste, the Thermal Pad Ultra avoids liquid pump-out migration entirely, though Phobya does not publish a specific service-life figure.

Comparison to Alternatives

Against Phobya's own Thermal Pad XT also in this catalog, the Ultra line runs lower conductivity (5 vs 7 W/mK) but is available in thicker options for bridging larger height differences on uneven mainboard components.

Our verdict

Reviewed by Burooj Alam. Rated by us, not by users.

Expert rating5.8 / 10

A small single-piece pad with modest conductivity, a niche fit for specific gap sizes.

Best for

VRAM, VRM, and mainboard chipset cooling needing a compressible pad to bridge height differences up to 4mm
Builds where a stiffer paste application is impractical, such as tightly-toleranced GPU backplates

Not for

CPU IHS-to-cooler contact where a conventional paste offers thinner bond lines
Buyers wanting Phobya's higher-conductivity Thermal Pad XT line instead

Specifications

What these specs mean

Identity and form

Brand	Phobya
Model	Phobya Thermal Pad Ultra 5W/mk

Electrical and board risk

Paste Segment	Pad

Application

Viscosity	4 Pa-s

Cure and durability

Pump-Out Resistance	High

Electrical Conductivity	Insulating
Package Size	15 x 15 x 4mm, sold as a single piece; also available in other sizes up to 120x20mm strips
Recommended Use	Mainstream CPU/GPU; Phobya also markets it for VRAM, VRM, and North/Southbridge cooling

FAQs

What are the key specifications of the Phobya Thermal Pad Ultra 5W/mK (Pad/Non-Conductive/15x15x4mm)?

Key specs for the Phobya Thermal Pad Ultra 5W/mK: Electrical Conductivity Insulating, Consistency Very flexible, low-hardness pad that adapts to uneven surfaces at low contact pressure; compressible to half its original thickness; maximum bridgeable gap of 4mm; slightly sticky surface under a removable protective foil, Pump-Out Resistance High.

Will the Phobya Thermal Pad Ultra 5W/mK (Pad/Non-Conductive/15x15x4mm) work with my current setup?

The Phobya Thermal Pad Ultra 5W/mK (Pad/Non-Conductive/15x15x4mm) lists Thermal Conductivity is 5. Check that against the hardware you already own before buying, since this is the field that most often decides whether a part fits.

Who is the Phobya Thermal Pad Ultra 5W/mK (Pad/Non-Conductive/15x15x4mm) best suited to?

Best suited to: VRAM, VRM, and mainboard chipset cooling needing a compressible pad to bridge height differences up to 4mm; Builds where a stiffer paste application is impractical, such as tightly-toleranced GPU backplates.

What are the drawbacks of the Phobya Thermal Pad Ultra 5W/mK (Pad/Non-Conductive/15x15x4mm)?

Not the best fit for: CPU IHS-to-cooler contact where a conventional paste offers thinner bond lines; Buyers wanting Phobya's higher-conductivity Thermal Pad XT line instead.