Consumercarts is reader-supported. Learn more
Alphacool Apex 2 Thermal Paste vs Thermal Grizzly Minus Pad Extreme: Comparison
Alphacool Apex 2 Thermal Paste vs Thermal Grizzly Minus Pad Extreme viscosity compared
They are built to different briefs, and viscosity shows it, Alphacool Apex 2 Thermal Paste 130 Pa-s against Thermal Grizzly Minus Pad Extreme 0 Pa-s. Density is not the same on both, 2.6 g/cm3 on the Alphacool Apex 2 Thermal Paste versus 3.38 g/cm3 on the Thermal Grizzly Minus Pad Extreme. There is a split on paste segment as well, Standard Paste on the Alphacool Apex 2 Thermal Paste versus Pad on the Thermal Grizzly Minus Pad Extreme.
Which should you buy, Alphacool Apex 2 Thermal Paste or Thermal Grizzly Minus Pad Extreme?
it is not built for buyers who specifically want liquid-metal-level conductivity. It also earns its place with high-end CPU and GPU builds, overclocking rigs, workstations and servers wanting Alphacool's current-generation paste. It is the wrong buy for anyone needing a confirmed silicone/carbon base disclosure, which Alphacool has not published for this formula. Buy the Thermal Grizzly Minus Pad Extreme for high-end GPU memory and VRM repads and overclocked cards where pad heat transfer is the limit, though it is the wrong buy for reusing pads after a teardown; Thermal Grizzly recommends one-time use and very uneven gap heights, where Minus Pad Pro conforms better. Our rating of the Alphacool Apex 2 Thermal Paste (6.7/10): A high-end Alphacool paste with a solid published conductivity figure, though independent review coverage is thinner than bigger paste-specialist brands. Our rating of the Thermal Grizzly Minus Pad Extreme (7/10): A high-density filler pad from Thermal Grizzly's Minus Pad line, good for gap-filling where a paste isn't practical.
Frequently asked questions
Do the Alphacool Apex 2 Thermal Paste and Thermal Grizzly Minus Pad Extreme differ on max operating temperature?
Yes. Max Operating Temperature reads 130 C on the Alphacool Apex 2 Thermal Paste versus 200 C on the Thermal Grizzly Minus Pad Extreme.
Is the Electrical Conductivity the same on the Alphacool Apex 2 Thermal Paste and Thermal Grizzly Minus Pad Extreme?
It is. Both are listed at Insulating, so it is not a reason to pick one over the other.
Specs and benchmarks
Brand
- Alphacool Apex 2 Thermal Paste
- Alphacool
- Thermal Grizzly Minus Pad Extreme
- Thermal Grizzly
Model
- Alphacool Apex 2 Thermal Paste
- Alphacool Apex 2
- Thermal Grizzly Minus Pad Extreme
- Thermal Grizzly Minus Pad Extreme
Electrical Conductivity
- Alphacool Apex 2 Thermal Paste
- Insulating
- Thermal Grizzly Minus Pad Extreme
- Insulating
Package Size
- Alphacool Apex 2 Thermal Paste
- 2g syringe
- Thermal Grizzly Minus Pad Extreme
- 120x20mm or 100x100mm sheets, 0.5/1/1.5/2/3mm thick, +/-0.1mm tolerance
Recommended Use
- Alphacool Apex 2 Thermal Paste
- High-end CPU/GPU (developed with Halnziye for CPUs, GPU hotspots, overclocking systems, workstations and servers)
- Thermal Grizzly Minus Pad Extreme
- High-end CPU/GPU
Safety Notes
- Alphacool Apex 2 Thermal Paste
- Causes serious eye irritation; toxic to aquatic life with long-lasting effects. Wear protective gloves and eye protection and wash hands thoroughly after use.
- Thermal Grizzly Minus Pad Extreme
- Cut to size with scissors; non-conductive
Viscosity
- Alphacool Apex 2 Thermal Paste
- 130 Pa-s
- Thermal Grizzly Minus Pad Extreme
- 0 Pa-s
Min Operating Temperature
- Alphacool Apex 2 Thermal Paste
- -20 C
- Thermal Grizzly Minus Pad Extreme
- -100 CBest
Max Operating Temperature
- Alphacool Apex 2 Thermal Paste
- 130 CBest
- Thermal Grizzly Minus Pad Extreme
- 200 C
Density
- Alphacool Apex 2 Thermal Paste
- 2.6 g/cm3
- Thermal Grizzly Minus Pad Extreme
- 3.38 g/cm3
Paste Segment
- Alphacool Apex 2 Thermal Paste
- Standard Paste
- Thermal Grizzly Minus Pad Extreme
- Pad
Operating Temperature
- Alphacool Apex 2 Thermal Paste
- -20 to +130 °C
- Thermal Grizzly Minus Pad Extreme
- -100C to 200CBest
Which one should you pick?
Choose Alphacool Apex 2 Thermal Paste if you already have it on hand or find it at a lower price.
Choose Thermal Grizzly Minus Pad Extreme if you already have it on hand or find it at a lower price.
Price comparison
| Retailer | Alphacool Apex 2 Thermal Paste | Thermal Grizzly Minus Pad Extreme |
|---|---|---|
| Alphacool Shop (EU) | View on Alphacool Shop (EU) | |
| Thermal Grizzly | View on Thermal Grizzly |
Disclaimer: The price and specification of the given product may differ from the actual product. Please confirm on the retailer's website before buying.
Verdict
Alphacool Apex 2 Thermal Paste
6.7 / 10 Expert Rating
A high-end Alphacool paste with a solid published conductivity figure, though independent review coverage is thinner than bigger paste-specialist brands.
Thermal Grizzly Minus Pad Extreme
7 / 10 Expert Rating
A high-density filler pad from Thermal Grizzly's Minus Pad line, good for gap-filling where a paste isn't practical.
More comparisons in Thermal Paste
- Alphacool Apex 2 Thermal Paste vs Thermal Grizzly Minus Pad Pro
- Alphacool Apex 2 Thermal Paste vs ID-Cooling Frost X45
- Alphacool Apex 2 Thermal Paste vs Noctua NT-H1
- Arctic MX-7 vs Thermal Grizzly Minus Pad Extreme
- Alphacool Apex 2 Thermal Paste vs ID-Cooling Frost X25
- Alphacool Apex 2 Thermal Paste vs Zalman ZM-STC10