Consumercarts is reader-supported. Learn more
Arctic MX-7 vs EKWB EK Thermal PAD G 2.0mm: Comparison
Arctic MX-7 vs EKWB EK Thermal PAD G 2.0mm: the viscosity difference
The first real difference is viscosity: Arctic MX-7 35000 Pa-s against EKWB EK Thermal PAD G 2.0mm 5 Pa-s. They differ on recommended use too, Mainstream CPU/GPU, High-end CPU/GPU on the Arctic MX-7 versus High-end CPU/GPU on the EKWB EK Thermal PAD G 2.0mm. They differ on density too, 2.9 g/cm3 on the Arctic MX-7 versus 2.6 g/cm3 on the EKWB EK Thermal PAD G 2.0mm. They differ on paste segment too, Standard Paste on the Arctic MX-7 versus Pad on the EKWB EK Thermal PAD G 2.0mm.
Arctic MX-7 vs EKWB EK Thermal PAD G 2.0mm: which one fits your build
Buy the Arctic MX-7 for MX-4 and MX-6 users wanting Arctic's newest formula and builds with exposed SMD components near the die, though it is not built for buyers who want a published W/mK figure to compare and anyone who prefers spreading paste with a spatula. It also earns its place with GPU, console and laptop repastes where pump-out is the main concern. The EKWB EK Thermal PAD G 2.0mm suits replacing worn factory thermal pads on EK full-cover water blocks and DIY water block rebuilds needing a 120x24x2mm pad, though it is the wrong buy for CPU/GPU direct-die paste application and builds needing higher-conductivity performance paste rather than a gap-filler pad. Our rating of the Arctic MX-7 (8.7/10): Arctic's newest flagship compound, positioned as a genuine step up over MX-6 for enthusiasts chasing the last few degrees. Our rating of the EKWB EK Thermal PAD G 2.0mm (6.3/10): A thicker reusable EK water block replacement pad for wider gap-filling needs.
Frequently asked questions
Do the Arctic MX-7 and EKWB EK Thermal PAD G 2.0mm differ on max operating temperature?
Yes. Max Operating Temperature reads 250 C on the Arctic MX-7 versus 200 C on the EKWB EK Thermal PAD G 2.0mm.
Is the Electrical Conductivity the same on the Arctic MX-7 and EKWB EK Thermal PAD G 2.0mm?
It is. Both are listed at Insulating, so it is not a reason to pick one over the other.
Specs and benchmarks
Electrical Conductivity
- Arctic MX-7
- Insulating
- EKWB EK Thermal PAD G 2.0mm
- Insulating
Material Class
- Arctic MX-7
- Carbon-Based
- EKWB EK Thermal PAD G 2.0mm
- Aluminum Oxide (Al2O3), 85-95% main ingredient
Package Size
- Arctic MX-7
- 2g, 4g, 8g tubes; 4g also sold bundled with 6x MX Cleaner wipes
- EKWB EK Thermal PAD G 2.0mm
- Type G, 120 x 24 x 2.0mm
Recommended Use
- Arctic MX-7
- Mainstream CPU/GPU, High-end CPU/GPU (marketed for CPUs, GPUs, consoles and laptops)
- EKWB EK Thermal PAD G 2.0mm
- High-end CPU/GPU (replacement pad for EK full-cover water blocks)
Safety Notes
- Arctic MX-7
- Non-conductive and non-capacitive; volume resistivity 1.7x10^12 ohm-cm, breakdown voltage 4.2 kV/mm
- EKWB EK Thermal PAD G 2.0mm
- Flame rating V-0; dielectric breakdown voltage >4kV; volume resistance >10^11 Ohm-m; natural tack on one side only, remove protective foil before installation
Viscosity
- Arctic MX-7
- 35000 Pa-s
- EKWB EK Thermal PAD G 2.0mm
- 5 Pa-s
Min Operating Temperature
- Arctic MX-7
- -50 C
- EKWB EK Thermal PAD G 2.0mm
- -55 CBest
Max Operating Temperature
- Arctic MX-7
- 250 C
- EKWB EK Thermal PAD G 2.0mm
- 200 CBest
Density
- Arctic MX-7
- 2.9 g/cm3
- EKWB EK Thermal PAD G 2.0mm
- 2.6 g/cm3
Paste Segment
- Arctic MX-7
- Standard Paste
- EKWB EK Thermal PAD G 2.0mm
- Pad
Operating Temperature
- Arctic MX-7
- -50C to 250C continuous use temperature
- EKWB EK Thermal PAD G 2.0mm
- -55C to +200CBest
Which one should you pick?
Choose Arctic MX-7 if you already have it on hand or find it at a lower price.
Choose EKWB EK Thermal PAD G 2.0mm if you already have it on hand or find it at a lower price.
Price comparison
| Retailer | Arctic MX-7 | EKWB EK Thermal PAD G 2.0mm |
|---|---|---|
| Arctic Store | View on Arctic Store | |
| Amazon | View on Amazon | |
| Best Buy | View on Best Buy | |
| Titan Rig | View on Titan Rig |
Disclaimer: The price and specification of the given product may differ from the actual product. Please confirm on the retailer's website before buying.
Verdict
Arctic MX-7
8.7 / 10 Expert Rating
Arctic's newest flagship compound, positioned as a genuine step up over MX-6 for enthusiasts chasing the last few degrees.
EKWB EK Thermal PAD G 2.0mm
6.3 / 10 Expert Rating
A thicker reusable EK water block replacement pad for wider gap-filling needs.